1947-1954 Chevy Pickup Truck Booster Master Cylinder Pedal Drum Brake Valve Kit

Description: 1947-1954 Chevy Pickup Truck Booster Master Cylinder Pedal Drum Brake Valve Kit Description:Brand New 1947-1954 Chevy Truck power brake booster assembly with residual valves for drum/drum applications with automatic transmission.This includes bracket and pedal assembly designed for the 1947 1948 1949 1950 1951 1952 1953 1954 Chevy Truck. This kit includes a bracket and pedal assembly designed for the 47-54 Truck. Also included in this is a high quality 7" DUAL booster and master cylinder combo. The dual diaphragm booster gives you 27% better stopping power over the single booster, making it better for cars that will have a heavier load. This setup is ready for all drum/drum applications.The master cylinder is Corvette style master cylinder with a 1" bore.The ports measure 9/16" and 1/2" on each side.It has four ports (two on each side) for easier installation. It also includes plugs for the ports you don't use.Additionally this includes a pair of residual brake pressure valves. Both are the 10 pound pressure valve (red) for front and rear drum brakes. These valves are used with any brake application where the master cylinder is located under the floor. When the master cylinder is under the floor, it is usually lower than the calipers. Gravity and vibration can cause brake fluid to leak back to the master cylinder away from the calipers, causing a loss of brake pressure. These valves will act as a one way check valve that prevents this type of bleed-back. Without it, there is a good chance that the brakes will drag or give out completely! These valves are an inexpensive and necessary addition to your brake system. This is for TWO valves, one for the front drum brakes and one for the rear drum brakes. Package:As shown in our picturesProfessional Installation is Highly Recommended (No Instruction Included)

Price: 181.99 USD

Location: Rowland Heights, California

End Time: 2024-12-24T09:38:33.000Z

Shipping Cost: 0 USD