Description: CHECK OUT CHICAGOLANDRC -COM FOR MORE SAVINGS2 PACK LISTING Compatible With:Virtually all 1/10 Scale Vehicles. Most batteries are about 25mm in height. *Note that due to the ~26mm height of the battery, an extended battery strap may be needed for some vehicles. Stampede VXL requires about 1-2mm of Washers/Spacers installed under the ESC Tray to allow room for the ~26mm battery height.1/8 Scale Vehicles that accept up to 6S LiPo batteries. Run 2 of these batteries in series to achieve 6S power!Please check with your Speed Control's manual to determine if it can accept 11.1V batteries.Use the size specifications below to determine if this battery will fit your application. Capacity: 5200mAh Voltage: 3S / 3 Cell / 11.1v Discharge Rate: 50C Constant (260A) / 100C Burst (10 sec) (520A) Charge Rate: 2C (10.0A) Watt Hours: 55.50Wh Weight: 11.6 oz / 329.0g (including wire, plug & casing) Dimensions LxWxH: 135.5 x 43.5 x 26.0 mm Dimensions w/ Wires folded at end of pack: 139.5 x 43.5 x 26.0 mm *Note that dimensions may vary by ± ~1mm. Discharge Plug: EC5 Connector Plug (IC5 Compatible) Balance Plug: JST-XH
Price: 69.99 USD
Location: Des Plaines, Illinois
End Time: 2024-02-13T20:09:49.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: VANT
Number of Cells (S): 3s
Voltage: 11.1v
upc: Does Not Apply
MPN: PH-3S-5200-EC5
Chemical Composition: LiPo
