AMX SDX-414-DX

Description: Ideal for use in huddle spaces or small classrooms to provide simple switching for multiple sources, the Solecis® SDX-414-DX from AMX can handle high-quality video resolution for 4K devices. This 4x1 4K HDMI digital switcher provides four user connection points and includes simplified local control which routes the selected signal to both a DXLink™ and HDMI output. This provides a simple, low cost solution that combines a DXLink Transmitter and digital switcher into a single small form factor device that is commonly used at a table.The Solecis SDX-414-DX digital switcher is also a suitable option for larger rooms with multiple work spaces, as a Solecis at each table or desk allows users to share content with the work group or the entire room. In even larger integrated environments Solecis digital switchers can provide easy to use source point switching and distance transmission over DXLink to an Enova DVX or DGX for hub-style building or campus-wide distribution.AMX Solecis SDX-414-DX Features:4K and Ultra High Definition (UHD) Support –Experience high-quality video resolution for 4K devicesMultiple Video, Audio and Ethernet Connections – All the connections you need at the conference table including audio, video, control and network accessSwitch Inputs Without the Need for a Central Controller – Provides low cost solution for huddle spaces and classroomsWorks with HydraPort Single Button or Keypad Modules – Provides an elegant installation in a table or lecternBuilt-in Support for AxLink Keypads – Forwards keypad commands to a central controller over Ethernet eliminating the need for a separate AxLink cable run AMX Solecis SDX-414-DX Specifications: Part#: FG1010-314Dimensions (H x W x D): 1 11/16" x 8 3/4" x 6 7/8" (42.16 mm x 222.25 mm x 175.92 mm)Weight: 3 lbs (1.4 kg) Signal Transport - DXLink:Connector: (1) RJ-45 Supported Signal Styles: Digital video, audio, Ethernet, bi-directional control Transport Layer Throughput (Max): 10.2 GbpsTwisted Pair Cable Type:Shielded Cat6, Cat6A and Cat7 DXLink twisted pair cable runs for DXLink equipment shall only be run within a common building where a common building is defined as: the walls of the structure(s) are physically connected and the structure(s) share a single ground reference Twisted Pair Cable Length: Up to 328 ft (100 m) HDCP Support: YesActive Power Requirements:Voltage, DC (Typical): 12 VDC Power Consumption (Max): 18 W Power Connector: 2-pin 3.5 mm Screw Retention Connector Power Supply:External, Required: Optimal performance requires use of one of the following AMX power supplies (not included):PSR4.4, 13.5 VDC, 4.5 A Power Supply with 3.5mm Phoenix Connector with Retention Screws (FG423-46) PSN6.5, 13.5 VDC, 6.5 A Power Supply with (3) 3.5mm Phoenix Connectors (FG423-41)Environmental:Temperature (Operating): 32° F to 104° F (0° C to 40° C) Temperature (Storage): -22° F to 158° F (-30° C to 70°C) Humidity (Operating): 5% to 85% RH (non-condensing) Humidity (Storage): 0% to 90% RH (non-condensing)Front Connectors:Advanced Configuration Interface: (1) USB Mini-B Connector ID Pushbutton: (1) ID Pushbutton, can be used to assign the unit’s Device ID, switch between Static and Dynamic IP addressing modes, and reset the unit to factory defaults Back Connectors:HDMI Input: (4) HDMI Type A Female Connectors HDMI Output: (1) HDMI Type A Female Connector DXLink Output: (1) RJ-45 Connector Ethernet LAN OUT: (2) RJ-45 Connectors Local Power: (1) 2-Pin 3.5mm Screw Terminal Connector with Retention Screws External Button/LED Control Connections: (4) 3-pin, 3.5mm Screw Terminal Connectors AxLink Keypad Control: (1) 4-pin, 3.5mm Screw Terminal ConnectorEthernet:Ethernet Connections: (2) RJ-45, 10/100 Port provides TCP/IP communication. This is an Auto MDI/MDI-X enabled port, which allows you to use either straight-through or crossover Ethernet cables. The Ethernet Port LEDs show communication activity, connection status, speeds, and mode information Ethernet Link/Act Indicator: (1) Link/Activity LED (green) blinks when receiving Ethernet data packets, one on Ethernet RJ-45 connector and one on the front panel Ethernet Speed Indicator: (1) Speed LED (yellow) lights On when the connection speed is 100 Mbps Ethernet connection and turns OFF when the speed is 10 Mbps Controls & Indicators:AxLink Keypad Port: (1), 4-pin 3.5 mm captive-wire connector, provides data and power to up to 2 external AxLink Keypads AxLink Indicator: (1) AxLink Keypad LED (green) indicates the state of the AxLink Keypad port LINK/ACT Indicator: (1) LED (green), lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets:Status Indicator: (1) LED (green), indicates boot and connection status Power Indicator: (1) Power LED (green) indicates the unit is powered on Signal Indicator: (4) Signal LEDs (green) indicate that video signal is present HDCP Indicator: (4) HDCP LEDs (yellow) indicate that source video is encrypted Select Indicator: (4) SELECT LEDs (green) indicate which video input is currently routed to the output Integrated Switcher:Video Switching: 4x1 (dual) audio/video switching, any of 4 inputs can be routed to the HDMI and DXLink output simultaneously Video Inputs: (4) HDMI; supports HDMI/HDCPVideo Outputs:(1) HDMI; supports HDMI/HDCP (1) DXLink; supports digital video, audio, Ethernet, and bi-directional control HDCP Support: Yes Select Pushbutton: Press to manually switch the input routed to the output. Each press switches to the next input in order, or if the last input is currently selected, switches to the first input.HDMI:Compatible Formats: HDMI, HDCP , DVI Input Signal Type Support:HDMIDVI-D (Single Link With Cable Adapter)DisplayPort ++ (Input Only, With HDMI Cable Adapter)Input Connectors: (4) HDMI Type A FemaleOutput Signal Type Support: HDMI, HDCP, DVIInput Re-clocking (CDR): YesDeep Color Support: YesColor Space Support:RGB 4:4:4 YCbCr 4:4:4 and 4:2:2 (Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4)3D Format Support:Yes (HDMI Primary Formats) Frame Packing 1080p up to 24Hz Frame Packing 720p up to 50/60Hz Frame Packing 1080i up to 50/60Hz Top-Bottom 1080p up to 24Hz Top-Bottom 720p up to 50/60Hz Side-by-Side Half 1080p up to 50/60Hz 3D supported when the HDMI DXLink RX Scaler is in Bypass mode and format is 1080p60 or less4K Resolution Support:3840 x 2160p @ 24/25/30 Hz 4096 x 2160p @ 24/25/30 Hz 3840 x 2160p @ 60 Hz, 4:2:0* 4096 x 2160p @ 60 Hz, 4:2:0*Audio Format Support:Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM Dolby Digital and DTS support up to 48kHz, 5.1 channelsAudio Resolution: 16 bit to 24 bitAudio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz,192kHzHDCP Support:Supports AMX HDCP InstaGate Pro Technology When used with an AMX Digital Media Switcher the key support is up to 16 sinks per output, independent of source device When used as a single point-to-point solution the key support is defined by the source device Regulatory Compliance: RoHSFCC Class ACEUL-ListedCSA ApprovedIEC60950UL94-V0 Flammability RatingNote:For passage of 4K signal content, 4K products must be used. Solecis 4K Digital Switchers are also compatible with DXLink Twisted Pair (non-4K) equipment and Enova DVX-3255HD, DVX-3155HD, DVX-3256HD, DVX-3156HD, DVX-2255HD and 2155HD All-In-One Presentation Switchers. Conditions may apply, please reference hardware reference manuals or contact technical support for details.

Price: 325 USD

Location: Richmond, Virginia

End Time: 2024-02-13T02:00:40.000Z

Shipping Cost: N/A USD