Emco Unimat 3 Mini Metal Lathe With Manual + Extras Made In Austria 🇦🇹

Description: Emco Unimat 3 Mini Metal Lathe With Manual + Extras Made In Austria 🇦🇹 See video where I show this running, It has two speeds on the motor and several positions for the belts to achieve many different speeds ranging from 130 to 4000 RPMs according to the nameplate. Also, the headstock and tailstock are both threaded in 14 x 1mm. The longer belt that is currently attached has some cracks in it but still functions. This comes with the original Emco Unimat 3 jaw chuck with Tommy bars, Unimat face plate with 2 unimat drive dogs, and two dead centers (these dead centers have very worn tips, but that is a great lathe project to re-cut fresh tips” also comes with the tool post and five used cutting bits as well as a hex key. Also included is the original instruction manual that features illustrations and has a lot of great information about this lathe and accessories. See photos for what you get as well as dimensions and cosmetic details such as signs of previous use and wear etc. Overall very nice condition and runs well. Also, I included a photo of the face plate and dead centers attached with a drive dog holding a piece of hex stock for reference. Also, the last photo shows an illustration in the manual where it references the capacities of the Chuck, the Chuck is 2 inches in diameter. Also the face plate is roughly 2-5/8 inch in diameter.

Price: 500 USD

Location: Denver, Colorado

End Time: 2024-11-11T04:23:29.000Z

Shipping Cost: N/A USD