Description: Vehicle Fitment Information Ford Mustang 2005 - 2009 Base & GT Models Built Before 8/2/09 - NOT FOR SHELBY OR BULLITT MODELS OR GT500 Models Package Includes 2x Complete Front LH & RH Quick Install Ready Strut Assembly - 172138 2x Rear Shock Absorber Assembly (Driver / Passenger) - 4349026 1x Front Passenger Side Lower Control Arm - K80726 1x Front Driver Side Lower Left Control Arm - K80727 2x Front Sway Bar End Links (Driver / Passenger) - K80899 2x Front Outer Tie Rod End Links (Driver / Passenger) - ES80805 2x Front Inner Tie Rod End Links (Driver / Passenger) - EV80804 Item Specifics Complete Strut Assemblies Direct Fit - Ready to Install - No Special Tools Required! Each Complete Strut Assembly is designed and tuned for vehicle specific applications Complete Strut Assembly includes strut, coil spring (when applicable), strut mount, boot, bumper kit, spring seat, and isolator Tough, gloss black, powder coated with neoprene dust boot Each Strut is nitrogen gas charged Quick and easy - remove and replace the complete Strut Assembly in one piece. Do the complete job with the right auto part the first time. Enhances overall handling, safety, and performance of your vehicle. Suspension Kit Precision-machined, advanced technology, low-friction polymer upper bearing provides smoother, easier steering, improved return-to-center, and eliminates endplay Powdered metal lower bearings for improved assembly strength Anti-corrosive coating provides protection from the harshest driving conditions Heat-treated, precision finished, ball ends for consistent torque and smooth operation throughout the entire range of driving Case-hardened, full-ball type stud offers tighter overall fit and improved stability Manufactured to meet or exceed expectations on performance and fit * Recommended replacement cycle Since the average annual distance of the car is 20,000 kilometers, and the shock absorber needs to be replaced in pairs, the replacement frequency is obtained every 4 years. In fact, the replacement frequency will vary depending on the car condition, road condition and shock absorber manufacturer. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I dont replace ball joints? If you dont want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Can I Drive With a Broken Strut? A strut is a suspension component that dampens an automobiles movements and prevents it from bouncing on its springs. Struts are often expensive to replace, but driving on a broken strut is not a good idea. (6).Can worn shocks or struts cause my new tires to wear unevenly? Absolutely: shocks and struts provide damping force to control tire movement. When the tires move excessively, they develop a “cupping” wear pattern that damages the tire.Other factors such as incorrect air pressure, worn suspension components or improperly aligned steering also causes uneven tire wear. (7).What are the benefits after replacing the shock absorber? Buffer conveys shock to drivers and passengers in order to improve ride comfort and reduce fatigue.Extend body life, prevent spring damage and improve braking effect.Suppressing the rapid vibration of the wheels while driving, preventing the tires from leaving the road surface and improving the driving stability.Improving driving stability and adjustability, effectively conveying engine deflagration pressure to the ground, so as to save fuel costs. Payment 1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. Shipping 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 2. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service 3.We do not offer local pickups. 4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Returns 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS! 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 4. Return shipping is to be paid by the Buyer. Feedback We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. All rights reserved.
Price: 276.97 USD
Location: Ontario, California
End Time: 2024-08-08T06:30:13.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 60 Days
Brand: Findauto
Manufacturer Part Number: FA83974901T
Manufacturer Warranty: 1 Year
UPC: Does not apply
Fitment Type: Direct Replacement
Placement on Vehicle: Front, Rear, Left, Right
Adjustable: No
Custom Bundle: Yes
Bundle Description: Complete Struts Assembly ,Sway Bar End Link ,Shock Absorber
Surface Finish: Polished, Rust Protected
Included Hardware: Mounting Hardware
OE Spec or Performance/Custom: OE Spec
Type: Strut & Coil Spring Assembly
Features: Sealed
Modified Item: No
Gas Charged Shock: Yes
Compression Range (in.): 16.03"(F),12.500"(R)
Extended Length (in.): 21.63"(F), 20.000"(R)
Interchange Part Number: 349026,172138,K80726,K80727
Other Part Number: K80899,ES80805,EV80804
Shipment: Split