GHOST ROCKET for GLOCK 42 43 43X 48 Trigger Connector 3.5lbs W/Stop Bar.

Description: This is an authentic Ghost Rocket Trigger Connector Bar that lightens trigger pull poundage to 3.5lbs AND has the built-on Trigger Stop Bar! This is very slightly used and I have already filed the trigger stop bar down just a very small amount. I don’t think anyone I know would ever want to use one with a longer trigger stop bar left on it. You CAN still file and adjust the bar shorter if you would like a bit more room after pulling the trigger and firing. This bar stops or shortens the over travel that Glock triggers have after the firing pin is already released. The trigger will usually still go a 1/4” inch further back or about from the factory, this setup can stop travel after just 1/8” or even shorter. BUT I WOULD NOT RECOMMEND TRAVEL STOP SHORTER THAN 1/8” REALLY, AS IT MIGHT CAUSE UNINTENDED FIRINGS BY RELEASING FIRING PIN TO EARLY WITH THAT TYPE OF SETUP !! I recommend 1/8” travel stop distance after pin is released. But Ghost’s website will give definite instructions on how you should set up but still recommend or urge gunsmith’s help! Trigger stop bars can and do cause an early release of the firing pin if not set up correctly. This setup is mainly intended for accuracy shooting or possible competition shooting for speed and accuracy. DISCLOSURE: !!!!! ***** IF YOU DO NOT KNOW EXACTLY WHAT YOU ARE DOING WITH THIS TYPE OF TRIGGER BAR, DO NOT, I REPEAT, DO NOT BUY AND TRY TO USE. IT WILL POSSIBLY CAUSE UNWANTED FIRINGS OR FIRING PIN RELEASES PREMATURELY IF YOU DO NOT INSTALL AND MEASURE AND USE PROPERLY!! YOU WOULD END UP LOCKING YOUR TRIGGER BACK WHILE FIRING OR COMPLETELY CHANGE YOUR FIRING PIN RELEASE TIMING OR NORMAL FUNCTIONS!!! I WILL NOT BE HELD LIABLE FOR ANY USE OR MISUSE OF THIS PRODUCT! I RECOMMEND THAT YOU HAVE A REAL GUNSMITH INSTALL AND SET THE APPROPRIATE LENGTH OF BAR AND FUNCTIONING CORRECTLY. HOWEVER, Ghost is the maker and designer of this item. Please refer to their website to see directions on how to use or set up per THEIR instructions!!! That all being said, if you prefer shooting with a trigger stop than this does function for that purpose just as it was intended. I WOULD NEVER CARRY MY EDC GUN WITH THIS TYPE OF DEVICE INSTALLED THOUGH!! THIS IS MY PERSONAL OPINION THOUGH BUT I EXTREMELY URGE AGAINST DOING THAT. **** HOWEVER, IF A PERSON WAS TO FILE THE STOP BAR COMPLETELY DOWN, EVEN WITH THE SIDE BAR, YOU WOULD HAVE A NORMAL HIGH QUALITY GHOST TRIGGER POUND REDUCTION BAR THAN WORKED COMPLETELY NORMAL FOR REDUCING THE TRIGGER PULL POUNDAGE. Just like the Glock factory minus “-“ connectors that are available at 3.5lbs. Thank you for looking, any questions please ask.

Price: 31.99 USD

Location: Tazewell, Virginia

End Time: 2024-08-19T21:20:26.000Z

Shipping Cost: 3.99 USD