Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (46T)

Description: New in package Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (46T) The Hot Racing hardened steel Mod 1 spur gear is an optional upgrade for the Traxxas E Revo 2.0, X-Maxx, XRT, Maxx, Maxx Slash and XO-1 models. NOTE: Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 Adjusting Gear Mesh) With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. Features:CNC machined hardened steel constructionBlack oxide finishedLaser etched tooth count markingUpgrade for factory plastic spur gear Specifications:Overall diameter: 52.8mmGear face width: 8mm Includes:(1) Mod 1 steel spur gear Vehicle models vary. We DO NOT guarantee this will fit the vehicle specified in this listing!Verify that this item is appropriate for your vehicle. Consult your manual or vehicle manufacturer.Verify vehicle fit-ment before purchase.Returns will only be accepted on items that are returned in new, factory-sealed packaging. Used, damaged (unless damaged when it arrived to you), and opened items will not receive a full refund. Any and all warranty claims will be handled through the manufacturer directly.

Price: 29.88 USD

Location: Binghamton, New York

End Time: 2024-12-21T20:13:05.000Z

Shipping Cost: N/A USD