IDE to SATA Hard Drive or Optical Drive Adapter Converter, 40-Pin PATA to 2.5...

Description: Connect a SATA device to an IDE/ATA motherboard or controller card Complete hardware solution; no software required Support for 48-bit Logical Block Addressing (LBA) Compliant with SATA revision 1.0 specification Supports SATA I/II/III (1.5/3/6Gbps) drives Compatible with Ultra ATA 133 specification Supports 2.5", 3.5", and 5.25" SATA Drives ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port - a cost effective solution that allows you to add newer SATA drives, and keep your existing motherboard. The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard. The IDE/SATA adapter is backed by a 2-year and free technical support. An internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface Ideal for use with older motherboards that do not support SATA Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection Hassle-free installation, with no software CD required Backed by a 2 year and free technical support Specifications Information 2 Years Connector(s) 1 - Connector Type(s) SP4 (4 pin, Small Drive Power) IDE (40 Pin, EIDE/PATA) SATA Data & Power Combo (7+15 pin) Environmental Operating Temperature 5°C to 50°C (40°F to 122°F) Storage Temperature -25°C to 80°C (-13°F to 176°F) Humidity 15~90% RH Hardware Interface IDE Number of Drives 1 Drive Size 2.5in & 3.5in Compatible Drive Types SATA Chipset ID Marvell - 88SA8052 Packaging Information Package Height 1.3 in [33 mm] Package Length 5.7 in [14.5 cm] Shipping (Package) Weight 3.1 oz [89 g] Package Width 6.9 in [17.5 cm] Performance Maximum Data Transfer Rate 133MB/sec Hardware Raid Supported No Physical Characteristics Weight of Product 1.0 oz [29 g] Color Red Material Steel Product Length 3.0 in [75.5 mm] Product Width 0.8 in [20 mm] Product Height 0.9 in [2.3 cm] Software OS Compatibility OS independent; No software or drivers required Special Notes / Requirements System and Cable Requirements An IDE controller and ATA cable (not included). What's in the Box 1 - Included in Package IDE to SATA adapter LP4 Molex to SP4 Power Cable Instruction Manual CONVENIENT SETUP: This IDE to SATA adapter enables SATA connectivity on older IDE motherboards, and is a complete hardware solution that does not require additional drivers or software; Works with any Operating System ADD SATA CONNECTIVITY: This IDE SATA converter is a cost-effective solution for connecting SATA hard drives or optical drives to legacy IDE systems, with no additional controller cards required; Includes LP4 to SP4 internal power cable WIDE COMPATIBILITY: Supports 2.5/3.5/5.25in SATA drives; Features features ODD (Optical Disk Drive) support for Blu-ray, DVD, or CD-ROM drives; Compliant with SATA version 1.0 and supports SATA I/II/III; Compatible with IDE/ATA 33/66/100/133 THE IT PRO'S CHOICE: Designed and built for IT Professionals, this IDE to SATA motherboard adapter is backed for 2 years, including free 24/5 multi-lingual assistance

Price: 31.44 USD

Location: Las Vegas, Nevada

End Time: 2024-09-12T05:45:16.000Z

Shipping Cost: 0 USD