Description: These O Scale post traffic lights are just what you need to bring life and realism to your model railroad or diorama. These lights are designed from the ground up to provide an accurate, true-scale replica of traffic signals seen in real life. With accurate LED colors and lenses, these lights provide a pleasing glow that will set your model apart. These post lights provide a life-like, plug and play lighting solution. Gone are the days of cartoonish, oversized lights with incandescent bulbs! Key Details At-A-Glance Scale: O (1:48) Light Configuration: Red/Yellow/Green Color: Yellow Dimensions: 3.1" x 0.85" x 0.85" LED Configuration: Common Cathode (Common Negative) Number of Wires: 14 Wire Length: About 2 Feet Wire Gauge: 30 AWG Operational Voltage Range: 5 VDC to 12 VDC Current-Limiting Resistor Value: 560 ohms Installation Instructions Though our traffic lights are made from a durable yellow resin, a more realistic effect can be achieved by painting them. A small amount of light bleed-through naturally occurs from the LEDs, however a layer of paint will reduce this. Be careful not to paint over the lenses though! Our traffic lights require a current-limiting resistor to work properly, which is included. If the light is connected to power without a resistor in place, this will instantly damage the light. To safely power the signal, connect one end of the resistor to the black wire, connect the other end to zero volts (ground), then connect the red, yellow, and green wires from the light to positive voltage. The resistor included with the light is designed to work with power supplies up to 12 volts. If this signal is being used with our Little Light Controller, the connections are simplified! The current-limiting resistors are built into the controller, allowing for a direct connection between the traffic signal and the controller. See the manual for our controller for more details. LED Technical Data Brightness Rating: 10 mcd Diode Voltage: 2 VDC Maximum Rated Current: 20 mA Red LED Wavelength: 640 nm Yellow LED Wavelength: 585 nm Green LED Wavelength: 570 nm
Price: 39.95 USD
Location: Sparta, New Jersey
End Time: 2025-01-16T16:08:35.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Country/Region of Manufacture: United States
Material: Plastic, Resin
Scale: 1:48
Type: LEDs
Features: Light Function, Not Painted
Color: Yellow
MPN: 3OC14000
Gauge: O
Brand: D5 DEM Model Smiths
State of Assembly: Ready to Go/Pre-built
