Panasonic HPX-170 w/ Century Xtreme Fisheye

Description: Panasonic HPX-170 w/ Century Xtreme Fisheye Selling my Panasonic HPX-170 with a Century Xtreme Fisheye. I have 6 batteries and 3 chargers, 2x 64gb Panasonic P2 cards. Also comes with rails to support the fisheye. Originally the fisheye came with a HXV-200 Bayo mount, I had 2 HPX-170 bayo mounts 3D printed and have been using the lens with my HPX-170 for the past couple years with no issue. The 3D printed bayo adds a little more space between the lens and camera, giving you a little bit more vignette around the edge of frame. I have the original HVX-200 bayo included. There are a few scuffs on the lens, one of them is on the rear element, where it connects to the camera. It shows up jus barely on the edge of the frame when filming, if you’re using a lower F stop sometimes it will be so soft it’s unnoticeable. The other scuffs are on the front element, pretty much superficial, kind of shows up if the sun hits it just right. Last scuff is a little chip on the bottom edge of front element, that does not show up at all in footage. Everything with the camera is in working condition, the only thing that has been acting up is the LCD screen. It works when you open it up, but if you tilt it or flip it over completely, the screen loses all contrast, you can still see image, it’s just difficult. The ribbon cable could either be loose or worn out from use, shouldn’t be a crazy fix. Viewfinder works fine, mic works perfectly, zoom is smooth. The P2 cards together give you around 2 hrs of filming time. More than enough batteries to last all day. Camera has 419 hrs of use. I have a used camera bag I can throw in too. It’s a little beat up, so you might want to buy a better one after some time.

Price: 7000 USD

Location: San Diego, California

End Time: 2024-11-11T23:33:01.000Z

Shipping Cost: N/A USD