Quorra Tron Style - EL Panel Costume Front+Back Glow Tape + Driver for Cosplay

Description: Quorra Tron Set This listing is for: 1) Two pieces of EL Tape Hoop shape to go near each shoulder 2) A thin 1.5cm x 25cm EL Tape to go down the front at one side 3) A 2cm x 40cm EL Tape to go down the front at the other side 4) A 2cm x 6cm EL Curve to 'tail off' the 40cm EL Tape 5) 2 x Double hoops for the waist 6) A 14cm EL Tape Tron Identity Disc 7) A Powerful 8xAA battery EL Driver or rechargeable 3000mAh Li-ion Driver (Li-ion batteries are only available to the UK due to airmail restrictions) 8) 5 Way Splitter, a 3 Way Splitter, a Mini 2 Way Splitter, a Mini 3 Way Splitter - these make the whole set a simple 'plug and play' 9) 1 metre of hook & loop tape - with sticky hoop and sewable loop to make it easy to attach the set to a costume and have it removable The whole kit is ready to use - just plug and play! Dimensions of the products: If you are making a costume, it is a good idea to plan it out properly. For this set, the Driver/Inverter is very powerful and comes with a separate power pack. So here are the dimensions of all the parts plus lengths of wire between them. THE POWER PACK* Takes 8xAA batteries (not supplied) and is 12.7cm x 7.2cm x 1.9cm it has a 65cm thin power wire coming out of it that leads to the... DRIVER The Driver is 6cm x 4cm x 4cm It has the controls on it - Off, Flashing or On It has a 55cm wire coming out of it that leads to the... SPLITTER The 5 Way Splitter is 40cm long in total, it is 20cm of wire which then splits into 5 separate strands which are all 20cm long 1 of them then lead to... Front Right A Mini 2 Way Splitter plugs into a 6cm EL Hoop and a thin 1.5cm x 25cm EL Tape Sticky back hook & loop tape is supplied that is the exact width of the EL Tape. You must sew the other part of the hook & loop tape onto the costume making it very convenient to attach and remove for washing. Of course, you don't need to use the hook & loop tape and fix it any way you choose Front Left Here a mini 3 Way Splitter is plugged into a 6cm EL Hoop, a long 2cm x 40cm EL Tape and a 6cm EL Curve to tail off the end of the EL Tape Two more of the channels off the main 5 Way Splitter go to... Double Hoops These two Double Hoop EL Shapes curve round either side of the waist Another channel off the main 5 Way Splitter goes to the back of the costume to... EL Identity Disc This Large El Hoop is 14cm in diameter, there are two thin EL Tapes running in concentric circles and the inner diameter is just over 9cm across SPLITTERS This is how we recommend using the Splitters: A 5 Way Splitter coming straight from the Driver - for the left side, right side, 2 x Double Hoops and ID Disc * Instead of an 8xAA Battery Box, this whole unit can be powered by a small rechargeable Li-ion battery The 3000mAh battery is as powerful as 8xAA batteries but weighs only 172g and is 7.3cm x 5.6cm x 2.2cm It comes with a 1A Intelligent (UK) Charger Please feel free to send a message to a member of our team if you have any questions. The whole kit is ready to use - just plug and play! A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our ebay store VISIT OUR SHOP TO SEE OUR RANGE OF INVERTER/DRIVERS, SPLITTERS AND OTHER EL WIRE

Price: 49.99 GBP

Location: Cross in Hand, East Sussex

End Time: 2023-12-07T15:47:14.000Z

Shipping Cost: 3.78 GBP