V-Seal 101 Multi-Surface Reactive Penetrating Sealer and Curing Agent

Description: V-SEAL® 101 Multi-Surface Reactive Penetrating Sealer and Curing Agent for Smooth Concrete, Brick, Stone, Stucco, and Porous Masonry PRODUCT DESCRIPTION V-SEAL® 101 is a chemically reactive deep penetrating sealer that permanently fuses within porous substrates of concrete, brick, stone, and mortar to significantly increase surface strength, combat freeze/thaw damage, and limit penetration of stains and damaging impurities such as oil, gas, grease, and salt. V-SEAL® 101 reduces dusting, retards mold and mildew, restricts efflorescence and hydrostatic moisture, and imparts waterproof characteristics. V-SEAL® 101 is breathable with minimal impact to traction coefficient. V-SEAL® 101 has excellent moisture retention characteristics and can be used as a curing agent for new machine trowel concrete. V-SEAL® 101 creates a cross-linked insoluble internal membrane barrier that will wear away only if the substrate itself wears away below sealer penetration. In addition to being a powerful exterior sealer, V-SEAL® 101 leaves no topical residue and is an ideal primer to protect the appearance and lifespan of topical coatings and floor treatments. RECOMMENDED USES Sealing residential and commercial structures such as machine trowel concrete floors, brick walls and chimneys, mortar, stucco, pavers, block, natural stone, artificial stone, roads, driveways, parking decks, sidewalks, patios, and basements. Architectural features such as countertops, mantels, furniture, ponds, fountains, and statues. V-SEAL® 101 is suitable for interior and exterior, horizontal and vertical, above and below grade applications. This product is compatible with most glues, mastics, and topical coatings. V-SEAL® 101 can be used as a curing agent for new machine trowel concrete. Coverage Rate 200-300 sq. ft. per gallon broom finish/rough 300-600 sq. ft. per gallon machine trowel/dense *Coverage rate is for estimating purposes only. Application rate is based upon porosity and absorption. Always test absorption prior to application. When properly applied product should create a wet surface sheen and absorb within 1 minute without puddles. Immediately disperse puddles. Excessive application may result in white residue which will not affect sealer performance and generally dissipates over time, but may removed immediately with abrasion. Drying Time Dry to touch 1-3 hours, traffic 6-12 hours. Inclement weather should be avoided for at least 12 hours. **Drying time is for estimating purposes only

Price: 195 USD

Location: Auburn, New York

End Time: 2024-11-08T13:54:54.000Z

Shipping Cost: N/A USD