Description: I recently purchased a number of high end electronics from the estate of an audiophile here in PA. This pair of Carver equipment CM 1090 integrated amplifier and TD-1440 tape deck was working when I packed them. Both pieces were tested in my shop and work perfectly. No issues. Cosmetically both are 9 of 10. Included a number of pics & a video are listed. If you need any more info let me know. I will be selling them as a pair only. Being sold as is used no return. Both will be packed carefully and fully insured.Shipping to the lower 48 will be $77.00 for both units. Thanks for looking. ED Carver Sonic Holography Integrated Amplifier Model CM-1090.Power output:100 watts per channel into 8Ω (stereo)150 watts per channel into 4Ω (stereo)Frequency response: 20Hz to 20kHz ± 1dBTotal harmonic distortion: 0.1%Signal to noise ratio: 78dB (MM), 90dB (line)Phono Gain: 36dBPhono IN, Tuner IN, CD IN, Video1 IN, Video2/AUX IN, Tape1 IN OUT, Tape2 IN OUTPreAmp/Main OUT INTone Control Turnover Frequencies: 100, 1000, 10000HzSpeaker Impedance A or B 8 Ohms min., A+B 16 Ohms min.AC Outlets:2x Switched 120VAC Total 200 Watts max.2x Unswitched 120VAC Total 300 Watts max.Sonic Hologram Generator Image Resolution: 5° horizontal, 20° vertical TD-1440 Tape DeckThe main features of the Carver TD-1440 are:, analog 3 digit tape counter, automatic tape type selection with support for normal, chrome and metal tapes.Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.Level meters used on the TD-1440 are analog needle VU reading meters. Full-logic transport controls used on the TD-1440 let it respond to the slightest finger contact for fast and effortless transport function selection.Dolby C-type used in the TD-1440 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. To further maintain recording accuracy, the TD-1440 incorporates a switchable multiplex filter. When you record FM stereo broadcasts, the MPX filter of the TD-1440 can be swiched on to prevent the standard 19kHz FM pilot signal from interfering with the noise reduction system.
Price: 750 USD
Location: Mertztown, Pennsylvania
End Time: 2025-01-10T13:42:41.000Z
Shipping Cost: 77 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Model: TD-1440
Brand: Carver
Type: Integrated Amplifier
